Changement disque sur le RAID : Unable to use SATA(SAS) drive to replace SAS(SATA)

Sun, 19 Jan 2025 00:00:00 +0000

J’ai voulu changer un disque du RAID : un SAS “DELL 900 GB ST900MM0006” par un SATA “KINGSTON SA400S37960G A To”

Mais il n’y a pas de reconstruction …

Information du RAID :

# megacli -ldinfo -lALL -aALL
                                     
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :900GbRd5
RAID Level          : Primary-5, Secondary-0, RAID Level Qualifier-3
Size                : 4.089 TB
Sector Size         : 512
Parity Size         : 837.75 GB
State               : Degraded
Strip Size          : 64 KB
Number Of Drives    : 6
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: Yes
LD's IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: Yes
Cache Cade Type : Read Only

Virtual Drive: 1 (Target Id: 1)
Name                :2TbRd1iw
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 1.818 TB
Sector Size         : 512
Mirror Data         : 1.818 TB
State               : Optimal
Strip Size          : 64 KB
Number Of Drives    : 2
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: No
LD's IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: Yes
Cache Cade Type : Read Only

Exit Code: 0x00

# perccli64 /c0 /eall /sall show
CLI Version = 007.0529.0000.0000 Sep 18, 2018
Operating system = Linux 6.8.12-5-pve
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.

Drive Information :
=================

----------------------------------------------------------------------------------
EID:Slt DID State DG      Size Intf Med SED PI SeSz Model                 Sp Type 
----------------------------------------------------------------------------------
32:0      0 Onln   0 837.75 GB SAS  HDD N   N  512B ST900MM0006           U  - 
32:1      1 GHS    - 893.75 GB SATA SSD N   N  512B KINGSTON SA400S37960G U  - 
32:2      2 Onln   0 837.75 GB SAS  HDD N   N  512B ST900MM0006           U  - 
32:3      3 Onln   1  1.818 TB SATA HDD N   N  512B ST2000VN003-3CW102    U  - 
32:4      4 Onln   0 837.75 GB SAS  HDD N   N  512B ST900MM0006           U  - 
32:5      5 Onln   0 837.75 GB SAS  HDD N   N  512B ST900MM0006           U  - 
32:6      6 Onln   0 837.75 GB SAS  HDD N   N  512B ST900MM0006           U  - 
32:7      7 Onln   1  1.818 TB SATA HDD N   N  512B ST2000VN003-3CW102    U  - 
----------------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encrypting Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down/PowerSave|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded

# megacli -PDList -aAll
                                     
Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 0
WWN: 5000C5007E266648
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 838.362 GB [0x68cb9e30 Sectors]
Non Coerced Size: 837.862 GB [0x68bb9e30 Sectors]
Coerced Size: 837.75 GB [0x68b80000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: LS0C
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5007e266649
SAS Address(1): 0x0
Connected Port Number: 2(path0) 
Inquiry Data: SEAGATE ST900MM0006     LS0CS0N2SHEW            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :25C (77.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 1
Enclosure position: 1
Device Id: 1
WWN: 50026b7785868c60
Sequence Number: 10
Media Error Count: 0
Other Error Count: 150
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Hotspare Information: 
Type: Global, is revertible

Raw Size: 894.252 GB [0x6fc81ab0 Sectors]
Non Coerced Size: 893.752 GB [0x6fb81ab0 Sectors]
Coerced Size: 893.75 GB [0x6fb80000 Sectors]
Sector Size:  0
Firmware state: Hotspare, Spun Up
Device Firmware Level: 70.5
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221106000000
Connected Port Number: 1(path0) 
Inquiry Data: 50026B7785868C60    KINGSTON SA400S37960G                   SHFK70.5
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Solid State Device
Drive:  Not Certified
Drive Temperature : N/A
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Drive's NCQ setting : N/A
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 2
Drive's position: DiskGroup: 0, Span: 0, Arm: 2
Enclosure position: 1
Device Id: 2
WWN: 5000C5007F6CEAE4
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 838.362 GB [0x68cb9e30 Sectors]
Non Coerced Size: 837.862 GB [0x68bb9e30 Sectors]
Coerced Size: 837.75 GB [0x68b80000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: LS0C
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5007f6ceae5
SAS Address(1): 0x0
Connected Port Number: 3(path0) 
Inquiry Data: SEAGATE ST900MM0006     LS0CS0N3AYB9            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :24C (75.20 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 3
Drive's position: DiskGroup: 1, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 3
WWN: 5000c500e76415ef
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: SC60
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221104000000
Connected Port Number: 4(path0) 
Inquiry Data:             ZWD0FNZ4ST2000VN003-3CW102                      SC60    
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :22C (71.60 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Drive's NCQ setting : N/A
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 4
Drive's position: DiskGroup: 0, Span: 0, Arm: 3
Enclosure position: 1
Device Id: 4
WWN: 5000C5007F21B7B8
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 838.362 GB [0x68cb9e30 Sectors]
Non Coerced Size: 837.862 GB [0x68bb9e30 Sectors]
Coerced Size: 837.75 GB [0x68b80000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: LS0C
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5007f21b7b9
SAS Address(1): 0x0
Connected Port Number: 7(path0) 
Inquiry Data: SEAGATE ST900MM0006     LS0CS0N3553B            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :26C (78.80 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 5
Drive's position: DiskGroup: 0, Span: 0, Arm: 4
Enclosure position: 1
Device Id: 5
WWN: 5000C5007F212928
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 838.362 GB [0x68cb9e30 Sectors]
Non Coerced Size: 837.862 GB [0x68bb9e30 Sectors]
Coerced Size: 837.75 GB [0x68b80000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: LS0C
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5007f212929
SAS Address(1): 0x0
Connected Port Number: 6(path0) 
Inquiry Data: SEAGATE ST900MM0006     LS0CS0N357QD            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :24C (75.20 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 6
Drive's position: DiskGroup: 0, Span: 0, Arm: 5
Enclosure position: 1
Device Id: 6
WWN: 5000C5007F21A7A4
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 838.362 GB [0x68cb9e30 Sectors]
Non Coerced Size: 837.862 GB [0x68bb9e30 Sectors]
Coerced Size: 837.75 GB [0x68b80000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: LS0C
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5007f21a7a5
SAS Address(1): 0x0
Connected Port Number: 5(path0) 
Inquiry Data: SEAGATE ST900MM0006     LS0CS0N355D8            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :24C (75.20 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: Unknown 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 7
Drive's position: DiskGroup: 1, Span: 0, Arm: 1
Enclosure position: 1
Device Id: 7
WWN: 5000c500e7641717
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: SC60
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221100000000
Connected Port Number: 0(path0) 
Inquiry Data:             ZWD0FP6VST2000VN003-3CW102                      SC60    
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :22C (71.60 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Drive's NCQ setting : N/A
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Exit Code: 0x00

# megacli -PdGetMissing -a0   
                                     
    Adapter 0 - Missing Physical drives

    No.   Array   Row   Size Expected
    0     0       1     857856 MB

Exit Code: 0x00

J’ai mis le disque en HotSpare pour que le Rebuild se fasse :

Achat server PowerEdge T420

Sat, 25 May 2019 00:00:00 +0000

Achat d’un serveur PowerEdge

32 x Intel(R) Xeon(R) CPU E5-2450 v2 @ 2.50GHz (2 Sockets)
RAM : 220 GB. (En vrai 224 Go)
Disk : 4 To en RAID.

Pour l’installation de Proxmox.

Je l’ai trouvé sur http://leboncoin.fr .

(DELL) Carte PCI Express : unsupported PM cap regs version (7)

Tue, 09 May 2017 00:00:00 +0000

J’ai deux cartes PCI Express qui fonctionnaient correctement avec des anciens serveurs DELL :

PowerEdge R710.
PowerEdge R410.
Precision T5600.
PowerEdge 2950.

Maintenant avec le serveur DELL PowerEdge R430 (BIOS Version 2.3.4), j’ai l’erreur : 0.544581 pci 0000:0704.0: unsupported PM cap regs version (7) ou alors un écran noir.

J’ai cherché sur les forums mais sans trouver de solutions…. et le support DELL ne traite que si les carte PCI express sont de chez DELL.

Dell on Blog GoHugo de Fredô : Linux, Proxmox, IA, Trail, Course, Randonnée, Gravel, Ski de Randonnée

Changement disque sur le RAID : Unable to use SATA(SAS) drive to replace SAS(SATA)

Achat server PowerEdge T420

Achat d’un serveur PowerEdge

(DELL) Carte PCI Express : unsupported PM cap regs version (7)